Buchi Vacuum Pump V-710 Manual do Utilizador descarregar pdf (Página 35)

5 Putting into operation

35 V-700/710 Operation Manual, Version E

The following installation instruction is valid for both variants, although the controller holders of the

V-700 and the V-710 model are different in design. The update kit contains all necessary hoses in a

universal set.

• Remove the original valve holder from the pump

housing (two allen screws).

• Take the metal base plate (1) from the installation

kit and make sure its fold (3) is located down-

wards, with the edge towards you.

• Mount the valve holder (2) with two allen screws

from the kit to the rights side of the base plate.

• The round shape of the holder is to be placed

downwards, towards the fold of the base plate.

• Finally, use the original valve holder to ﬁx the new

assembly at the pump housing (4).

Use the four screws (2) to ﬁx the pump holder onto the controller holder (1). With the long center screw (3) the

whole adapter can be ﬁxed at the pump.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

Sem comentários

Buchi Vacuum Pump V-710 Manual do Utilizador Página 35